The Skywire® 4G LTE CAT 3 embedded modem leverages high-speed Category 3 technology and supports LTE (Long Term Evolution), HSPA+, and UMTS communication, minimizing costs of hardware and network access. This modem delivers 100Mbps download speeds and 50Mbps upload speeds over mobile networks, and features a U.FL port for antenna flexibility.

SKU: NL-SW-LTE-TSVG, NL-SW-LTE-TNAG, NL-SW-LTE-TEUG Categories: EOL,

Skywire® 4G LTE CAT 3 Embedded Modem

SKU: NL-SW-LTE-TSVG, NL-SW-LTE-TNAG, NL-SW-LTE-TEUG

The Skywire® 4G LTE CAT 3 embedded modem leverages high-speed Category 3 technology and supports LTE (Long Term Evolution), HSPA+, and UMTS communication, minimizing costs of hardware and network access. This modem delivers 100Mbps download speeds and 50Mbps upload speeds over mobile networks, and features a U.FL port for antenna flexibility.

Skywire embedded modems dramatically reduce the cost, risks and timelines of IoT product development. With known-good RF engineering and fully validated software, Skywire allows you to focus on your application and not engineering cellular radios. Standardized connectivity gives you flexibility to update and alternate radios for new geographies, carriers and technologies. Further, our embedded modems are “End-Device Certified”, meaning your end-product will not need to go through the complex process of carrier certification. This is critical for the first release of your product and each iteration as you obtain market feedback. Skywire modems significantly reduce time-to-market and are ideal for product development through large-scale production. All Skywire modems are patented and backed by industry-leading documentation and expert-level product support.

The NL-SW-LTE-TSVG(-B), NL-SW-LTE-TNAG(-B) and NL-SW-LTE-TEUG Skywire® modem is end of life. It is not recommended for new design (NRND).

Skywire FAQs

Product Brief

  • Skywire Form-Factor
  • 4G LTE CAT 3
  • All RF Engineering contained within the modem
  • Carrier End-Device certified
  • Removable SIM card slot
  • GNSS Support for GPS, Glonass, Beidou, Galileo, and QZSS
  • U.FL port for antenna flexibility
  • Direct module access via Serial UART or USB
  • Multi-carrier support on a single device
  • Skywire family pin compatibility
  • RoHS compliant
  • Development kits available
  • Faster speeds than LTE CAT1, LTE-M, NB-IoT, 3G, and 2G technologies
  • Region and carrier specific models for most regions
  • Internal GPS & GLONASS receiver for satellite location services
  • Data plans available
  • Throughput: 100Mbps Download/ 50Mbps Upload
  • Average: 250 mA
  • Peak: 590 mA
  • Idle: 40 mA
  • Sleep: N/A
  • I/O Voltage: 1.65V-5.5V
  • Temperature Range: -40º to 85ºC
  • Dimensions: 29mm x 33mm x 10.5mm
  • RoHS Compliant

Deployable Region

Carriers

Bands

Buy Now

NL-SW-LTE-TSVG-B

LTE without Fallback, GPS, GLONASS, Verizon, Firmware 17.01.573

Discontinued

NL-SW-LTE-TSVG

Skywire modem, LTE CAT3, GPS, GLONASS, Verizon, Firmware 17.01.571

Discontinued

NL-SW-LTE-TNAG

Skywire modem, LTE CAT3, GPS, GLONASS, AT&T, Firmware 17.00.503

Discontinued

NL-SWDK2

Skywire development kit version 2 includes baseboard, antenna, power supply, AT&T SIM card, and debug cables. (Does not include Skywire modem.)

Buy From

NL-SIM-COM

SIM card, Verizon, 3FF, Commercial Temp range

Buy From

NL-SIM-IND

SIM card, Verizon, 3FF, Industrial Temp range

Buy From

NL-SIM-ATT-CTRI

SIM card, Tri-cut, 2/3/4FF, AT&T, 4G LTE, Commercial Temp range

Buy From

NL-SIM-VER-TRI

SIM card, Tri-cut, 2/3/4FF, Verizon, 4G LTE, Commercial Temp range

Buy From

Need Help Choosing?

If you need help selecting a Skywire, or if you have any other questions, please do not hesitate to contact us.